Zebra Technologies
ZTC ZT411-203dpi ZPL

99N222401389

Internal Wired PrintServer

Home


View Printer Configuration

  +10.0               DARKNESS          
  14.0 IPS            PRINT SPEED       
  +000                TEAR OFF ADJUST   
  TEAR OFF            PRINT MODE        
  GAP/NOTCH           MEDIA TYPE        
  REFLECTIVE          SENSOR SELECT     
  DIRECT-THERMAL      PRINT METHOD      
  822                 PRINT WIDTH       
  1651                LABEL LENGTH      
  41000-71/2202-03154 PRINT HEAD ID     
  15.0IN   380MM      MAXIMUM LENGTH    
  MAINT. OFF          EARLY WARNING     
  NOT CONNECTED       USB COMM.         
  BIDIRECTIONAL       PARALLEL COMM.    
  RS232               SERIAL COMM.      
  9600                BAUD              
  8 BITS              DATA BITS         
  NONE                PARITY            
  XON/XOFF            HOST HANDSHAKE    
  NONE                PROTOCOL          
  NORMAL MODE         COMMUNICATIONS    
  <~>  7EH            CONTROL PREFIX    
  <^>  5EH            FORMAT PREFIX     
  <,>  2CH            DELIMITER CHAR    
  ZPL II              ZPL MODE          
  INACTIVE            COMMAND OVERRIDE  
  CALIBRATION         MEDIA POWER UP    
  CALIBRATION         HEAD CLOSE        
  DEFAULT             BACKFEED          
  +000                LABEL TOP         
  +0000               LEFT POSITION     
  OFF                 APPLICATOR PORT   
  ENABLED             ERROR ON PAUSE    
  PULSE MODE          START PRINT SIG   
  DISABLED            REPRINT MODE      
  033                 WEB SENSOR        
  080                 MEDIA SENSOR      
  050                 TAKE LABEL        
  086                 MARK SENSOR       
  034                 MARK MED SENSOR   
  002                 TRANS GAIN        
  097                 TRANS BASE        
  056                 TRANS LED         
  002                 MARK GAIN         
  053                 MARK LED          
  DPCSWFXM            MODES ENABLED     
  ........            MODES DISABLED    
   832 8/MM FULL      RESOLUTION        
  6.6                 LINK-OS VERSION   
  V92.21.11Z <-       FIRMWARE          
  1.3                 XML SCHEMA        
  7.0.1 23.24         HARDWARE ID       
  8176k............R: RAM               
  65536k...........E: ONBOARD FLASH     
  NONE                FORMAT CONVERT    
  FW VERSION          IDLE DISPLAY      
  11/28/24            RTC DATE          
  05:40               RTC TIME          
  DISABLED            ZBI               
  2.1                 ZBI VERSION       
  READY               ZBI STATUS        
  22,635 LABELS       NONRESET CNTR     
  22,635 LABELS       RESET CNTR1       
  22,635 LABELS       RESET CNTR2       
  189,503 IN          NONRESET CNTR     
  189,503 IN          RESET CNTR1       
  189,503 IN          RESET CNTR2       
  481,338 CM          NONRESET CNTR     
  481,338 CM          RESET CNTR1       
  481,338 CM          RESET CNTR2       
  *** EMPTY           SLOT 1            
  *** EMPTY           SLOT 2            
  0                   MASS STORAGE COUNT
  0                   HID COUNT         
  OFF                 USB HOST LOCK OUT 


Home: https://www.zebra.com
Support: https://www.zebra.com/support.html